Hot Runner Brand:Yudo/ Mastip/ HASCO/ DME/ MOLD-MASTER…etc
Rapid tooling: For cases where customers have urgent deadlines, a small quantity, and a limit development budget, so, we often use the old mold base or manual tool option to achieve it. Its advantages: short lead time, low cost, and tolerances is still within tolerance. Its disadvantage: Short mold production life.
Production mold: It takes LKM standard, economical hot runner system etc. to make molds for mass production, the advantage is make in house, maintenance, storage, slight mold adjustment etc.. are very convenience ;its disadvantages: Once the mold is moved to a foreign customer, it is not convenient for after-sale because of different standards;
Export mold: We are 100% customized according to customer's specified requirements. Its brand standards include HASCO, DME, LKM, etc. The hot runner is mainly chosen YUDO. The advantage is that the mold is accurate and the mold life is long. Because it matches the customer's standard, it can be put into mass production immediately. Its disadvantage: The mold cost is relatively high. Due to the long transportation time, the customer's mass production plan might be adjusted accordingly.
Plastic injection molding: which is characterized by the use of thermoforming, and the use of corresponding molding parameters according to different materials to inject plastic products. This technical process is suitable for mass production and has a relatively high production capacity. The commonly used materials are: ABS, PC, POM, PMMA, PA6, PA12, PA66, PBT, PC + ABS, PE-HD, PA + GF, etc ... According to the customer's product assembly drawings and functions, we can submit some material suggestions for you have a reference purpose. We have more than 20 injection molding machines with a tonnage range from 80T-550T and product sizes from about 1mm-500mm. We also can produce insert injection molding and two-color injection molding parts against to customer’s requirement.